|||||||||
 
Stock# 071873 
Category: Ironworkers
Subcategory: Ironworkers
Manufacturer: PIRANHA
Model: P-65
Serial No: P65-004132
Status: New
PIRANHA (NEW) MODEL P-65 IRONWORKER

8" THROAT
13-1/2" OPEN HEIGHT
9-1/4" CLOSED HEIGHT (WITHOUT DIE BLOCK)
4-1/4" STROKE
10" X 17" PLATEN TABLE

PUNCH - 65 TON CAPACITY
1-1/16" DIAMETER HOLE THROUGH 3/4" MATERIAL
5" DIAMETER HOLE THROUGH 1/8" MATERIAL
PLATE SHEAR - 15-1/2" LONG
3/4" X 10"
5/8" X 15"
ANGLE SHEAR
5" X 5" X 3/8"
BAR SHEAR
1/4" TO 1-1/2" ROUND
1/2" TO 1" SQUARE
COPER NOTCHER - 56 TON CAPACITY
2-3/4" X 4" X 1/4"
PUNCH END
30 SPM @ 3/4"

42" WORK STATION HEIGHT (APPROX)
HYDRAULICS
7.5 PUMP GPM
3000 SYSTEM R/V PSI
20 GALLON FLUID CAPACITY
7.5 HP, 230 VOLTS, 3 PHASE, 1800 RPM

RATED ON MILD STEEL (60,000) PSI TENSILE STRENGTH

STANDARD EQUIPMENT
PUNCHING ATTACHMENT W/SPLIT DOVE TAIL MOUNTING
5 PUNCH AND DIE SETS
AUTOMATIC URETHANE HOLD DOWNS ON
PUNCH STRIPPER
ANGLE SHEAR
PLATE SHEAR
BAR SHEAR
FRONT AND REAR 5-POSITION JOY STICK CONTROLS
JOG UP AND DOWN
FAST UP AND DOWN
NEUTRAL
REMOTE ELECTRIC FOOT SWITCH
LIMIT SWITCHES
CAN BE SET FOR STROKE CONTROL W/FOOT CONTROL
SET OF ROUND BAR KNIVES (2 WAY)
SET OF 12-1/8" PLATE SHEAR KNIVES (4 WAY)
SET OF ANGLE KNIVES (8-WAY TOP, 4-WAY BOTTOM)
SET OF COPER KNIVES (2-WAY TOP, 4-WAY BOTTOM)
CHIP BUCKETS (2 EACH)
EXTRA OIL FILTER
COUPLING WRENCH
3/8" ALLEN WRENCH
INTEGRAL LIFTING LUG FOR INSTANT PORTABILITY

OPTIONS AVAILABLE - PRICE ON REQUEST
PIPE/TUBE NOTCHING
CHANNEL DIE BLOCK
BENDING ATTACHMENTS
28XX PUNCH ATTACHMENT
PRESS BRAKE TOOLING HOLDERS
QUICKSET GAUGING TABLES
CHANNEL SHEAR
BACKGAUGES
1-1/2" OVERSIZE PUNCH ATTACHMENT
ROLLER FEED TABLES


210 South Street SE  •  Dodge Center, MN 55927-9251  •  Office 507-374-6346  •  Fax 507-374-6824
©2019 SOMINN – All Rights Reserved